Category Archive: Hydraulic Equipment

Cylinders and pumps for even the heaviest of tasks.

Hydraulic Torque Wrenches (1″ and 1.5″)

LTS Series Lightweight socket wrench with standard square drive Variety of adaptors available in spline drive sockets and hexagon capscrew drivers Models from 500Nm to 5,000Nm Single or double-acting operation Maximum operating pre

Enerpac 50 Ton Pancake Cylinder

Enerpac pancake lock nut cylinders have an extremely low height for use in confined areas Lock nut for positive and safe mechanical load holding over a long period of time Single-acting, load return Optional special synthetic coating for improved corrosion resistance and lower friction for smoother operation Overflow port functions as a stroke limiter CR-400 …

Continue reading »

RC-106 10 Ton – 6.13″ Stroke Hydraulic Cylinder

Enerpac RC Series hydraulic cylinders set the industry standard for general purpose cylinders. The golden ring absorbs eccentric loading without galling cylinder parts. Collar threads, plunger threads and base mounting holes enable easy fixturing. You will enjoy a cylinder design for use in all positions, and a high strength alloy steel for durability. Nickel plating …

Continue reading »

RLS502 50 Ton Hydraulic Cylinder

RLS502 – Cylinder Model # : RLS502 Name : Cylinder Order # : RLS502 Capacity : 50 ton Stroke : 2.38 inch Min. Height : 4.81 inch Max. Pressure : 10000 psi Oil Cap. Req. : 22.8 cu. in. Weight : 24 lbs. Description HD internal spring for retract assistance. Heat treated hardened load cap …

Continue reading »

RLS100 10 Ton Hydraulic Cylinder

10 Ton Single-Acting Spring-Return ASME B30.1 10000 psi Ideal for confined areas from 1 5/8″ to 4″ clearance. Cylinder body, piston and gland nut “Power Tech” treated for corrosion and abrasion resistance Standard domed piston rod (5- 30 ton) or swivel cap (50-150 ton) minimize effects of off-center loading. Unique heavy duty spring provides fast …

Continue reading »

Simplex Electric Pump

These units feature 115V permanent magnet motors that will continue to operate on as low as 60 volts. The 20 Series pump is lightweight and portable, but powerful enough to start under full load, even on low voltage. Cast aluminum reservoirs dissipate heat and make these pumps rugged enough for the toughest construction environments.   …

Continue reading »

Simplex 100 ton, 18″ Stroke Hydraulic Cylinder

Description Single acting, spring return cylinder. Stop ring for piston blow-out protection. Plated¬†piston to resist scoring and corrosion. Rod wiper protects inner cylinder from dirt. Single Acting, spring return cylinder. Stop ring for piston blow-out protection. Plated piston to resist scoring and corrosion. Rod wiper protect inner cylinder from dirt. Collar and piston threads for …

Continue reading »

Simplex 10,000 PSI Manual Hydraulic Hand Pump (P72)

    Model # : P72 Name : Hand Pump Order # : P72 Max. Pressure : 10000 psi 1st Stage Flow : 0.91 cu. in. / min. 2nd Stage Flow : 0.19 cu. in. / min. Usable Oil Capacity : 70 cu. in. Weight : 9 lbs.

PEM7032 Hydraulic Power Pump

Two speed operation provides fast advance while the Suc-O-Matic feature reduces retraction time. Quiet running saves your ears while working and dual ports make for easier pluming. Make it easy for yourself with the PEM7032. Key Features 2 gallon reservoir size Standard 3 position, 3 way, manual lever actuated valve 1.5 HP motor 71 lbs

RLS1002 100 Ton Cylinder

Simplex Cylinders contain a heavy duty spring for fast and full retraction. The carry handles are standard on all models. Hard anodized coating reduces wear & corrosion. Key Features Capacity: 100 tons Stroke: 2-1/4 in Min height: 5-9/16 in Ext height: 7-13/16 in Ram Bore dia: 5 in 19.63 sq in effect area 10,200 psi …

Continue reading »

Older posts «