«

»

Gehl 383Z Zero Tail Swing Mini-Excavator

The Gehl Model 383Z features zero-tail-swing maneuverability without compromising operator comfort or service access. The 383Z has the largest operator’s compartment in its class and the innovative tiltable cab provides excellent service access.

ENGINE
Make Yanmar 3TNV88-PNS (EPA Tier II)
Type 3-cyl. diesel, water-cooled
Displacement (cc) 100 cu.in. (1642)
Net Power (kW) 28.8 hp (21.0) @ 2400 rpm
Battery (aH) 12-V (71)
Fuel Tank (L) 11.6 gal. (44)
HYDRAULICS
Pumps two var. cap. + two gear pumps
Flow Rate – gpm (L/min) 2@10.6 (40) + 7.0 (26.3) + 3.0 (11.3)
Working Pressure (bar) 3481 psi (240)
Swing System Pressure (bar) 3046 psi (210)
Oil Cooler Standard
Hydraulic Tank (L) 11.9 gal. (45)
UNDERCARRIAGE AND SLEWING SYSTEM
Travel Speed – dual (km/hr) 1.74 mph (2.8), 2.85 mph (4.6)
Gradability 30° = 58%
Rubber Track Width 12″ (300)
No. of Track Rollers 1 top / 4 bottom on each side
Track Tension hydraulic
Undercarriage Length (mm) 6’10” (2075)
Sprocket Center 5’7″ (1702)
Ground Clearance (mm) 11″ (280)
Ground Pressure avg. (kg/cm²) 4.8 psi (0.34)
Slew Speed 8.8 rpm
GENERAL SPECIFICATIONS
Operating Weight with cab and A/C (kg) 8,002 lbs. (3630)
Operating Weight with canopy (kg) 7,826 lbs. (3550)
Height (mm) 8’2″ (2500)
Width (mm) 5’8″ (1740)
Length (mm) 15’9″ (4800)
Arm Length (mm) 5’5″ (1650)
Maximum Digging Depth (mm) 11’0″ (3360)
Maximum Digging Height (mm) 15’3″ (4660)
Maximum Vertical Digging Depth (mm) 8’9″ (2670)
Maximum Dump Height (mm) 11’0″ (3350)
Maximum Digging Radius (mm) 18’2″ (5540)
Bucket Dig Force (kN) 5,778 lbf (25.7)
Arm Force (kN) 4,923 lbf (21.9)
Drawbar Pull (kN) 6,614 lbf (3000)
Minimum Tail Swing Radius (mm) 2’10” (870)
Minimum Front Swing Radius (mm) 6’5″ (1965)
Swing Angle – left/right 70°/55
DOZER BLADE
Width (mm) 5’8″ (1740)
Height (mm) 13.6″ (345)
Maximum Lift – Above/Below (mm) 15.4″/17.7″ (390/450)