«

»

Gehl RT175 Track Loader

Gehl RT175 Track Loader

Specifications

Dimensions

A  Overall Operating Height – Fully Raised 168″
B  Height to Hinge Pin – Fully Raised 127.5″
C  Reach – Fully Raised 34.5″
D  Dump Angle – Fully Raised 40.2°
E  Dump Height – Fully Raised 98″
F  Maximum Rollback Angle – Fully Raised 102.5°
G  Overall Height at ROPS 82.8″
H  Overall Length with Bucket – Standard Counterweight 144.0″
I  Overall Length without Bucket – Standard Counterweight 110.8″
J  Specified Height 67.5″
K  Reach at Specified Height 31.1″
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 7″
O  Maximum Rollback Angle at Carry Position 33°
P  Digging Position – Below Ground -0.3″
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 13.3″
S  Track Gauge 51.7″
T  Track Shoe Width 12.6″
U  Crawler Base 54.8″
V  Overall Width – Less Bucket 64.4″
W  Bucket Width 65.9″
X  Clearance Radius – Front With Bucket 91.4″
Z  Clearance Radius – Rear with Standard Counterweight 62.1″
Maximum Rollback at Specified Height 66.8°
Angle of Approach 90°
Grouser Height 1″

Capacity

Operating Capacity at 35% Tipping Load 1,750 lbs.
Operating Capacity at 50% Tipping Load 2,500 lbs.
Tipping Load 5,000 lbs.
Operating Weight 8,605 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMSL Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 203 cu.in./4
Gross Power @ rpm 69.9 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm 179 ft.-lbs. @ 1600
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 11,840 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6″
Ground Pressure 6.2 psi

Forces

Bucket Breakout – Tilt Cylinder 5,189 lbs.
Bucket Breakout – Lift Cylinder 4,840 lbs.
Ground Speed – Single Speed 5.1 mph
Ground Speed – Two Speed 7.5 mph

Volume

Fuel Tank 24 gal.
Hydraulic Reservior Tank 11.0 gal.
Coolant Capacity 3.5 gal.

Hydraulics

Auxiliary Hydraulic Flow – Rated Speed 18.5 gpm
High-Flow Hydraulic Flow – Rated Speed 34.0 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ 0°F